-
Boring Heads
Least Count: 0.02mm (Standard Model)
Least Count: 0.01mm (High Accuracy Model)
Least Count: 0.005 (Ultra Precision)
Range: 20-80mm, 50-150-75-200
Shank: R 8 (M1TR), ISO 40, ISO 30, BT 40 -
Cylindrical ER Collet Chuck
Shank Nut Size Type Type Cyl 10 ER 08 A, M, UM 100/150/200 L Cyl 12 ER 11 Cyl 16 ER 11 Cyl 20 ER 16 Cyl 25 ER 20 Cyl 32 ER 25 Cyl 40 ER 32 Cyl 50 ER 40 -
ER Collets (High/Medium Precision)
Size Range Collapsiblity ER 08 0.5 to 5.0 mm 0.5 mm ER 11 0.5 to 7.0 mm 0.5 mm ER 16 1.0 to 10.0 mm 1.0 mm ER 20 1.0 to 13.0 mm 1.0 mm ER 25 1.0 to 16.0 mm 1.0 mm ER 32 2.0 to 20.0 mm 1.0 mm ER 40 3.0 to 26.0 mm 1.0 mm *High Precision Below 5 Micron / Medium Precision Below 10 Micron
-
ER spanner
Size M Type Hex Type UM Type ER8 Yes Yes No ER11 Yes Yes No ER 16 Yes Yes Yes ER 20 Yes Yes Yes ER 25 Yes No Yes ER 32 No No Yes ER 40 No No Yes ER 50 No No Yes -
ERG Tap Collets
Size Tap Size ERG 16 M3 to M10 ERG 20 M3 to M12 ERG 25 M3 to M14 ERG 32 M3 to M20 ERG 40 M3 to M25 Note: Kindly Provide square and round dia size. -
Indexable Drills
Size LD Suitable Inserts 13 mm to 50 mm 2 WCMX 3 SPMT 4 SPMG All drills are through coolant -
Indexable End Mill
Shank Dia Degree Length Length
15,16 mm 16,17 45 60 20,25 mm 20,25,32 45 60 100mm to 350mm 32,40 mm 20,25,32,40 45 60 End mill Cutter Dia 50, 63, 80, 100, 125, 160, 200 Suitable to Mitsubishi, Widia, Dijet, Sadvik, Taegutec, Hitachi, Customized
-
Indexable End Mill Round
Shank Dia ER UM Length 15,16 mm 16,17 ER 25 20,25 mm 20,25,32 ER 32 100mm to 250mm 32,40 mm 20,25,32,40 ER 40 Round Cutter Dia 50, 63, 80, 100, 125, 160, 200
Suitable to Mitsubishi, Widia, Dijet, Sadvik, Taegutec, Hitachi, Customized -
Keyless Drill Chuck
Size Type Taper Size 0-6mm Light Duty/Heavy Duty B10 / B12 / JT1 1-13 mm B16 / JT6 / JT3 5-20 mm B22 / B16 / JT6 / JT3 -
Locking Device
Type Type Type Type BT 30 CT 30 HSK 50 ISO 25 BT 40 CT 40 HSK 63 ISO 30 BT 50 CT 50 HSK 100 ISO 40 -
Mars-Tech Indexable Cutter APMT 1135 Dia 25 BAP300R-C25-25-200-3T
₹1,499.00This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use any ISO inserts of APMT1135 into this ,
-
Milling Holders
Type Spindle Size ER Collect Chuck BT 30 BT 40 BT 50 Side Lock Holder CT 30 CT 40 CT 50 Face Mill Holder ISO 30 ISO 40 ISO 40 Morse Taper Holder HSK NT Lengths – Standard 70/100/150/200 -
Pull Stud / Retention Knob
Type Size Degree BT 30/40/50 30/45/60/90 CT 30/40/50 30/45/60/90 ISO 30/40/50 30/45/60/90 MAZAK 40/50 DIN Standard All sizes are availabe with or without hole. Any Custom size as per sample or drawing can also be produced (MOQ Required)
Recent Comments